Keyboard shortcuts

Press ← or → to navigate between chapters

Press S or / to search in the book

Press ? to show this help

Press Esc to hide this help

Units and settings

This chapter explains the units CivilKit CAD works in and every setting in the settings dialog: theme and language, the layout of the window, sketching, navigation, the move ball and the geometry kernel. It also covers automatic backup, which has no setting.

Open the dialog by clicking Settings (the gear) at the right of the top bar, by choosing Workspace settings in command search, or from the Workspace group of the View tab. Changes apply at once. The dialog remembers the tab you used last.

All settings are kept in your browser, for this site only. They are not saved in part files, and they do not follow you to another browser or computer. Clearing the site’s data in your browser resets them.

Units

CivilKit CAD works in millimetres and degrees. There is no unit setting. Part files store millimetres, and sizes in editors and on the status bar are shown in millimetres.

You can still type a value in another unit. A number field accepts a unit after the number: mm, cm, m, in for lengths, and deg or ° for angles. CivilKit CAD converts it to millimetres. For example 2 in becomes 50.8 mm, and 1.5 cm becomes 15 mm. A field also accepts simple arithmetic and variable names, such as =width*2+3. See Equations and variables.

The grid Spacing field in the status bar accepts units in the same way, for example 0.25 in.

General tab

SettingChoicesDefault
ThemeMatch system, Light, DarkMatch system
LanguageThe languages installed.Shown only when more than one language is available. At present English is the only one.

The theme changes the colours of the whole application, including the viewport background when the background is set to Theme. See Languages.

Layout tab

The layout tab controls which parts of the window are shown. Start with a preset, then adjust.

SettingChoicesWhat it does
PresetPlasticity-style, Classic ribbon, Minimal, Custom (your own mix)Applies a whole set of the settings below at once. It shows Custom when your settings match no preset.
Panel sizesReset layoutRestores the default widths and heights, unfolds a folded or switched-off left panel and brings the tools back if the ribbon and the tool rail were both off.
RibbonOff (command search), Compact, FullOff hides the ribbon and relies on command search and the tool column.
Left panelDocked, Floating, HiddenWhere the feature tree and its tabs sit.
Inspector panelOff, Docked right, FloatingThe raw property column for the selected feature. Off by default: a feature is edited in a card over the viewport. Phones and narrow tablets ignore it.
Button labelsIcons and text, Icons only (label on hover)How ribbon and palette buttons look.
Left panel tabs (Outliner, Features, Assets, Editor)on / offOne list, or tabs. With tabs on, the left panel offers Outliner, Features, Editor, Catalog, Variables, Script and Bodies.
Tool railon / offA column of modelling tools down the left edge.
Tool palette in sketcheson / offA floating palette of sketch tools on the right edge while sketching. Off: the Sketch tab carries the tools.
Selection mode baron / offThe bar with Auto, Face, Edge, Corner, Body, Box select and the filters.
Bottom drawer openon / offWhether the drawer is open.
Direct-manipulation handles on the canvason / offThe arrows and dots you drag to change a depth, radius, thickness or diameter.
Floating panel opacity15 % to 100 %How see-through floating panels are.
Highlight line thickness1 to 8The width of selection and hover lines.
Backdrop blur0 to 30Blur behind floating panels.

The presets set the following:

Plasticity-styleClassic ribbonMinimal
RibbonOffFullOff
Left panelDocked, tabs onDocked, tabs onFloating, tabs off
Inspector panelOffDocked rightOff
Tool railOnOffOff
Selection mode barOnOffOff
Bottom drawerOpenClosedClosed

A first visit starts with a mix of these: the full ribbon, a floating left panel with tabs, the inspector panel off, no tool rail, no selection mode bar and a closed drawer. Because it matches no preset, the dialog shows Custom (your own mix). If you saved a layout in an earlier version with the inspector docked, it is switched off once when this version first opens; set Inspector panel to Docked right to bring it back.

Drag the handles between panels to resize them. The sizes are remembered. Drag a panel below its minimum and it folds away; the keyboard works too: focus a handle and use the arrow keys, Home and End, and Enter to reset. [ shows or hides the left panel and \ the drawer.

Sketching tab

How the sketch editor takes input. See Sketch tools and Constraints and dimensions.

SettingChoicesDefault
Infer constraints while drawing (Shift at a click turns it off)on / offOn
Line to tangent arcRest the pointer on the end, Keys and drag only, OffRest the pointer on the end
Values beside the pointerDimensions, Dimensions and positions, OffDimensions
Snap to the gridon / offOn
Keep the view when entering a sketch (Look normal squares it up)on / offOn
Auto look normal for new sketcheson / offOff

The Snaps menu in the Status group of the sketch tab holds the rest: which kinds of snap are on (End points, Centres, Midpoints, Quadrants, Intersections, Perpendicular, Tangent, On curve, the model snaps, Alignment guides and Grid), Add constraints from snaps, and Auto-constrain from guides.

The Up axis, Orbit mode and Orbit around settings. See Moving around the model.

Positioning tab

Settings for the Move / rotate ball. See Moving things: the move / rotate ball and handles.

SettingDefault
Snap distance (mm)10
Snap angle (degrees)15

Hold Ctrl while dragging a handle of the ball to move in whole steps of these sizes.

Kernel tab

The geometry kernel is the part of CivilKit CAD that builds solids. By default it runs inside your browser. See The local kernel service for how to run the faster service.

SettingWhat it does
Kernel to useBuilt-in (runs in this browser) or Local service (faster, runs on this computer).
Service addressWhere the local service listens. Shown with the local service.
Access tokenThe token the service printed or saved when it started. It stays in this browser only.
Test connectionChecks the address and token, and reports the kernel version, the protocol and the number of cores, or why it cannot be used.
Try the service againAppears after a failure.

Switching kernels reopens the open part on the other kernel. If the service stops or turns out to be a different build from the app, the built-in kernel takes over and a notice tells you. While the local service is selected, the status bar shows a Kernel chip: Local with a version, Connecting, or Built-in (service off). Click the chip to come back to this tab.

Messages

Messages from the app (a finished import, a refusal and the reason) appear once, in a stack at the bottom right. A long message wraps, with Show more for the rest and Copy for an error. A message stays long enough to read, pauses while the pointer is on it, and closes with x or Esc. The status bar shows only an Alerts count; click it to list the last 50 messages.

Backup and saving

There is no autosave setting. A moment after you change a part, CivilKit CAD writes a backup of every changed part to the browser’s storage, and again when the page is hidden. After a crash or reload the app offers Restore your last session, with Restore, Start new and Earlier versions…. Each changed part returns in its own tab.

The backup has limits you may meet:

  • It is capped at about 3 MB. A part larger than that is not backed up, and a notice says so.
  • If the browser has no room left, or does not allow storage, the notice says that too.
  • The undo history is not part of the backup.

Save to a file for anything that matters. More file actions > Recover earlier versions… lists versions kept in the browser from a few minutes ago.

Next