CivilKit Open CAD

What's new in CivilKit CAD

Release notes for every version, newest first. The app shows its version at the bottom of Settings. User guide · Open CAD

0.8.2

Extrude can taper the whole outline

In the Extrude editor, End scale scales the outline to a factor at the far end, so 0.5 ends at half size. It works on any profile, holes included, and with blind, mid-plane and flip ends.

Press Pull continues a face straight, with a taper

Pick a flat face, choose Continue: Straight and a distance: a positive one adds a piece, a negative one cuts one. Add a Draft angle or an End scale and the panel shows the wall angle it makes.

Heat-set seat on a hole

Pick a round hole and choose Heat-set seat: the insert panel opens with the insert at the hole's mouth, along its axis, in the size whose hole is nearest.

Messages appear once, in one tidy stack

Messages stack at the bottom right, wrap long text with Show more and Copy, stay long enough to read and pause while you hover. The status bar shows an Alerts count; click it for the last 50.

All changes in 0.8.2 (13)
  • Extrude can taper the whole outline. In the Extrude editor, End scale (1 = none) scales the outline linearly to that factor at the far end, so 0.5 ends at half size; it is also extrude(depth, { endScale }) in scripts.
  • MCP tools answer in a few hundred characters, not thousands. app_state is compact and paged with filters and deltas, big results are summarised behind a handle (fetch_result), app_edit applies a whole edit atomically, app_open_asset opens a file by…
  • Moving one piece of a split face makes a step. Move Face on one half of a split face now raises or sinks that piece with a wall along the split line, and picking it no longer shows the size box that moves the whole extrude.
  • Fillets and chamfers refuse what they cannot do, and say why. A round that would be dropped, a round too small to change the part (with a size that builds), a chamfer wider than its disc, a pattern of a fillet and an unreadable hole field are each refused with…
  • Combine works on a body with a sealed void, and tapers refuse folds. A taper that would fold a thin web is refused with the largest angle that works, and a narrowing taper can end on a body.
  • More SolidWorks parts rebuild. A later draft picks its faces and neutral plane by geometry, leaves out faces that already lean, and reports a face the document lacks as missing.
  • Plugin errors read as sentences, and plugin numbers keep what you type. A failed plugin now says what went wrong instead of showing a JSON record, and the first digit typed into the next field no longer vanishes.
  • A suppressed feature row no longer prints its button over the name. The unsuppress button sits at the right edge and the type and id stay readable.
  • Alerts are tidy and readable. Messages now appear once, in a stack at the bottom right that wraps long text (Show more, and Copy for an error), stays long enough to read, pauses while you hover it and can be closed with x or Esc.
  • Z-up names the planes the Z-up way. With the view set to Z up, the horizontal plane (XY) is now called Top and the one facing you (XZ) is Front, in the tree, the start card, the plane labels and the plane pickers, so Sketch on Top…
  • Press Pull can continue a flat face straight, with a taper. In the Press Pull panel, Continue: Straight carries a flat face on as if it were extruded, joining a piece for a positive distance and cutting one for a negative one, with an optional Draft…
  • Heat-set seat on a hole. Pick a round hole and choose Heat-set seat: the Heat-set insert panel opens with the insert at the hole's mouth, along its axis, in the size whose hole is nearest.
  • Plugins can edit the boards you pick. A plugin package can now read what is selected (selection.get, with a flat face's normal), measure the bodies already in the part, and cut, join, intersect, turn and move them (solid.cylinder…

0.8.1

Z up is the default, with upright Front and Right planes

New parts start Z up, the way 3D printing and most newer CAD work. In a Z-up view, Front and Right stand upright when you sketch on them and Top is the ground plane; the plane names and the tree follow. Parts you already have open as they did, and Settings switches back to Y up.

Recognise features rebuilds an imported STEP as editable steps

After you import a STEP file, Recognise features (beta) reads its holes, fillets and outline, rebuilds it step by step and checks that the volume matches the file. Open it as a new part and the steps sit in one From STEP folder, with the file's exact body (Original (STEP)) beside it so you can switch either off and compare.

Teardrop holes for 3D printing

Pick a round hole, choose Teardrop hole, and CadKit adds a peak above it so a horizontal hole prints without support. You set which way is up and the overhang angle, can cut the tip flat, and apply it to every hole of a pattern at once, in one folder you can switch off.

All changes in 0.8.1 (7)
  • Import DXF and Import SVG only where they work. They were on the Home ribbon but only worked inside a sketch, so they sat greyed out.
  • Z up is the default, and Front and Right stand upright in it. New parts start Z-up (3D printing and most newer CAD work that way); a setting you already saved keeps its choice, and parts made before this open Y-up as they were drawn.
  • Teardrop holes for 3D printing. Select the wall of a round hole and choose Teardrop hole to add a printable peak above it, pointing the way you say is up, with the peak angle and an optional flat top.
  • Holes on a face cut in the right direction. A hole or cut on a picked face used to go the wrong way on a flat plate under a boss or cone and report "it cuts nothing"; it now always goes into the part.
  • Recognise features from a STEP file (beta). After a STEP import, Recognise features finds the holes, pockets, fillets, plates and turned bodies in the solid and rebuilds them as a new part with a feature tree, only offering it when the…
  • SolidCraft's new .sc files open. SolidCraft now saves with the extension .sc; both .sc and .solidcraft import (drop, Open, or the file picker).
  • SolidCraft files with a surface extrude and a thicken import. A closed spline extruded as a surface and thickened used to come in as two sketches and two skipped rows ("surface_extrude", "thicken").

0.8.0

A feature edits in a card over the model

On a wide window, open a feature and its editor appears as a floating card with labelled fields, dropdowns and sections, while the left panel keeps the tree. The raw column of field names on the right is off by default; Settings brings it back. Phones and narrow tablets keep their single panel.

Plugins: generators you can add

Features > Plugins adds a form-driven generator (a case, a spring) in one undo step, edits it later with Edit parameters, and moves the whole thing with Move folder. Compiled plugins use SolidCraft's plugin format, so SolidCraft plugins (tried with its Woodwork cabinets) run here once packed; switch on "Allow plugins from other people" to install them from a zip or a GitHub address, and they run in a sandbox. Doors and drawers do not swing yet; checked in Chrome and Safari so far.

The Sketch tab keeps Select and Finish in view

Select and Finish stay pinned at the left of the Sketch ribbon while the tools scroll, Import DXF and Import SVG are in a new Import group inside a sketch, and the scroll arrows no longer cover tools.

More SolidWorks parts open with their history

Drafted boss faces, fillets round a closed curve and bosses closed by a chord now rebuild as features, so more parts open editable instead of as one imported body. A feature the kernel cannot read back still ends the history there.

All changes in 0.8.0 (6)
  • A feature edits in a card over the model. Opening a feature (double-click it, or the pencil) shows its editor as a floating card with labelled fields, dropdowns and sections, and the left panel keeps the tree.
  • The Surfaces and Features tabs show every command. Planar, Extruded, Revolved, Lofted, Fill, Offset, Extend, Trim, Knit, Thicken and Freeform are now one button each instead of three dropdowns, and Reference, the Draft family and Bodies on the…
  • The Sketch tab keeps Select and Finish in view. Select and Finish stay pinned at the ends of the Sketch ribbon while the tools scroll between them, Import DXF and Import SVG are in a new Import group inside a sketch, the scroll arrows no longer…
  • Plugins: add generators made by other people. Features > Plugins lists built-in generators (Case, Springs) and, once you switch on "Allow plugins from other people", any you install from a zip, a github:owner/repo@tag address or a link.
  • More SolidWorks parts open with their full history. Drafted boss faces, fillets that run round a closed curve and bosses whose outline closes with a straight chord now rebuild, so parts that stopped partway (a drafted boss, a fillet round a hole) open…
  • Thicken works on a tight closed spline. Thickening an extruded closed spline on one side gave a broken preview and took over a minute; it now builds in about a second and is a valid solid.

0.7.4

Text along a curve

Draw a construction line, arc or spline where lettering should run, tick Along a curve and pick it. The letters follow the curve, move with it, and can be centred, slid along or put on the other side.

Trays, bins and baseplates

The Tray wizard makes a Gridfinity tray or bin on a grid you choose, with the foot, scoops and magnets; set Make to Baseplate for the plate its foot seats in.

An iPad-style layout, round two

Fold the left panel with one tap on its edge, keep Undo and Redo in a card beside the tool column, and the tools can always be brought back. Made for an iPad-style screen; not yet tried on a real iPad.

All changes in 0.7.4 (8)
  • Online libraries work in the desktop app. Adding a library from GitHub (github:owner/repo or its web address) failed there with "The library could not be reached", because the desktop window did not allow the connection to GitHub's file…
  • Text along a curve. Draw a construction line, arc or spline where lettering should run, select the text, tick Along a curve and pick it: the letters follow the curve and move with it.
  • iPad fixes. The New button is back in the tablet top bar, the fold handle no longer leaves a gap when there is no tool column, the value boxes in a slim panel wrap so you can see what you type, the ƒ key…
  • The tool column follows the left panel. The Plasticity-style tool column now sits directly against the left panel (tree, features, editor) and moves with it as it opens, folds or is resized, instead of floating over the canvas beside it…
  • Fold the left panel with one tap. A handle on the edge of the panel (44 px high on a touch screen), a panel button at the left of the top bar and the [ key fold and unfold the left panel.
  • The tools can always be brought back. A saved layout with no ribbon and no tool column is repaired on start, Settings never lets both be off at once, a tablet always shows the compact ribbon in that case, Minimal shows a **Show…
  • Undo and Redo always in reach on a tablet. A pair of 44 px buttons at the top left of the canvas stays on screen with the left panel open or folded and in a sketch, and greys out when there is nothing to undo or redo.
  • One layer for floating messages. Messages, the new-version note, the busy indicator, hints and the start card now stack in named regions instead of printing over each other and over the view controls.

0.7.3

A Create menu with the shapes

Box, Cylinder, Sphere, Cone, Torus, Boss and Slot are on the ribbon: pick one, click a face or plane, and it is placed. Press Pull pushes or pulls picked faces, and Combine joins the bodies under faces you pick.

Rings, tubes and springs from numbers

Torus, Pipe, Coil and Bounding solid need no sketch. Set the radii, the wall, the pitch and the turns in the Editor, and the shape follows as you type.

Dome, Split face and Offset surface

Raise a dome (or cut a dimple) on a round flat face, split a flat face in two along a plane without cutting the body, or make a new surface a set distance from faces.

Fillets on a twisted extrude

Round the top edges of a twisted extrude: a 40 mm square twisted 30 degrees takes a 2 mm fillet all the way round, where before the fillet was refused.

All changes in 0.7.3 (11)
  • The update notice is a small card. When a newer version is ready, a card under the top bar says so with Reload and Later and warns when you have unsaved changes (it used to be a line squeezed between the tabs and the ribbon).
  • Long values in the Mass properties panel wrap at spaces. In Mass properties and the other inspect panels the label and value columns share the width, so a long value breaks at its spaces instead of in the middle of a number.
  • An agent linked to the app can now cut the open part. The agent link has a new read-only app_section tool (exact cross-section at a plane.
  • Fillet works on a twisted extrude. Rounding the edges of an extrude with a twist now works up to about 30 degrees, and a ring of four edges (the top of a twisted square) up to about 45; before it was refused.
  • A Create menu with the shapes, and Press Pull. Box, Cylinder, Sphere, Cone, Torus, Boss and Slot are now on the ribbon: choose one and click a face or plane to place it.
  • New solids from numbers. Torus, Pipe (a tube along an open sketch, solid or hollow), Coil (a spring) and Bounding solid (a box round the bodies you pick) need no sketch; set their sizes in the Editor.
  • Dome, Split face and Offset surface. Dome raises a cap (or cuts a dimple) on a flat round face, Split face cuts flat faces in two along a plane or sketch lines without cutting the body, and Offset surface makes a new surface…
  • A Tray wizard, with a drawer fit. Tray (Features > Create) makes a tray or bin on a grid (Gridfinity-style 42 mm units, half units allowed).
  • The version is in the status bar. The bottom right of the app shows the version you are running (v0.7.3), and clicking it opens the What's new page.
  • A ? button for help on what you are using. A round ? in every editor and wizard, in the sketch ribbon for the active sketch tool and in the status bar opens a card with one sentence and a link to the matching section of the user guide.
  • The page no longer zooms in on an iPad. Every text box, list and note field is at least 16 px on a finger device (the one inside the sketch keyboard helper and the copy box were not covered when the layout was set to Desktop), the page and…

0.7.2

A layout made for iPad

In portrait the canvas gets two thirds of the screen, the panel tabs are icons, and the sketch ribbon is one row you swipe across, with an arrow and a fade at the edge that still hides tools.

The keyboard follows the pen

Lift the pen or a finger after drawing a circle and the radius field opens with the keyboard up. Every field that can go negative has a plus/minus key, and pen strokes and a resting palm are handled.

Updates apply themselves

When you come back to the installed app and a newer version is out, it reloads itself if nothing is unsaved and shows what it updated to. A setting in Settings turns this off.

All changes in 0.7.2 (6)
  • A portrait iPad gives the canvas the room. In portrait only the tabbed left panel is docked (the properties of the selected feature are in its Editor tab), the panel tabs show icons that no longer clip, the sketch ribbon stays one row that…
  • The app updates itself. When you open the installed app again (it sits suspended on an iPad for weeks) and a newer version is out, it reloads by itself and says "Updated to 0.7.2", as long as nothing is unsaved and no…
  • Offline right after an update on a phone or tablet. The kernel the app had stored is kept across an update and refreshed in the background, instead of being missing until it was next used online.
  • The iPad keyboard comes up where you type. After you drag out a circle with a finger or the Apple Pencil, or pick two lines with the Dimension tool, the value field is focused from the lift itself, so Safari on an iPad raises the on-screen…
  • A minus sign on the iPad and iPhone number keys. Number boxes that can be negative (positions, offsets, rotations, move and mesh fields, mate values) show a ± key above the keyboard on a touch device, and boxes that take only a positive number…
  • Apple Pencil strokes and resting palms. The Pencil draws like a finger on the sketch tools (press, drag, lift), stays steady when it rises out of hover range, and a palm touching the screen while the Pencil is down is ignored instead of…

0.7.1

Round the edges of a case

The Case wizard has a Round the edges setting: Side edges, Top edges or both, each with its own radius. The case now stands upright on the Top plane, and the wizard no longer leaves the construction sketches drawn in the view.

All changes in 0.7.1 (3)
  • No stray outlines after a wizard. The sketches a wizard builds with (the Case ones, for example) no longer draw orange outlines round the new part or float where a hidden body was.
  • The case stands up. The Case wizard and caseBox() now build the case on the Top plane, floor at y = 0 and the lid on top, instead of lying on its back along +Z.
  • Round the case edges. The Case wizard has a Round the edges setting: Side edges, Top edges or both, each with its own radius.

0.7.0

Right-click a hole to add a bolt

Select a hole wall, right-click and choose Add fastener to hole. The size comes from the hole, the length from the material, with an optional washer and nut and a checkbox for all identical holes on the same plane. Everything goes in as separate bodies in one undo step.

A Case wizard: a box with a lipped lid in one step

On the Features tab, Case takes the outside size, wall thickness, corner radius, lid height and the lip (tongue height, width and clearance) and makes the Base and the Lid, with the tongue on one half and a groove on the other.

Split body and Lip joint

Cut a body at a plane into two named bodies, or add a tongue and a groove with a clearance along the cut. The guide builds a two-part case with the volumes checked.

Rib with fillet, draft and one-sided thickness

The Rib editor gains a fillet on the free edge, a draft angle, a choice of side and the bodies it extends to. A rib no longer fills a bore its line runs through.

Nut, Standoff and Heat-set insert wizards

Parametric hex nuts (ISO 4032, 4035, 4033), round and hex standoffs, and heat-set inserts, each with a live preview, from the Features tab. The dimensions are marked unverified until checked against the standards.

Patterns in any direction, about any axis

A linear pattern can run along any direction vector or edge, and a circular pattern about any axis, with a point on the axis, so a bolt circle does not have to sit on the origin.

The assistant can measure and check the part

The Chat and the MCP server can now read distances, clearances, overlaps, wall thickness, draft and manufacturing checks, so an assistant can verify what it built. The injection moulding check also finds undercuts.

Script helpers for draft, lip, scale, split and more

Typed script methods for draft, move face, lip and groove, scale, split, delete body and face, helix, axis, sphere and move body, and sweeps that follow guide curves.

All changes in 0.7.0 (24)
  • A Case wizard. Case (Features > Create) makes a closed box with a lipped lid in one step.
  • A variable in a plane offset no longer freezes the app. A Plane feature whose offset is an expression (such as H/2, as a script writes it when a dimension is tied to a variable) crashed the feature tree and left the app on "Rebuilding model...".
  • The halves of a split or lip joint keep their names. The Bodies panel showed the halves as Case 1 and Case 2 instead of the names you gave (Base and Lid by default), and a later cut or boss could lose one name or join the two halves again where they…
  • Add spline point now works from a click on the curve. Clicking an open or closed fit spline with the Add spline point tool used to answer "Pick a spline" every time, because the click never reached the tool.
  • Split a body by a plane, and a lip joint for two-part cases. Split body cuts a body at a plane (a face, a standard plane or an offset plane) into two named bodies, and Lip joint also gives the cut a centred tongue on one half and a matching groove…
  • Torsion springs, cones and progressive springs. The Spring wizard's Type setting now also has Torsion (legs).
  • Extension springs. The Spring wizard has a Type setting: Compression or Extension (hooks).
  • Rib: fillet, draft, one-sided thickness and a choice of body. A rib can round its free edge (fillet), taper its two sides toward the free edge (draft, one straight line), put all its thickness on one side of the sketch plane (side) and grow to named…
  • A rib no longer fills a bore its line runs through. The web used to fill part of a bored cylinder when the rib was made after the bore cut; it now stops at the outer wall of the body, so a rib gives the same part before or after the bore.
  • Better advice when an open line is extruded, and a warning for a one-sided through cut. Extruding a sketch that is one open line now says to use Rib for a web or Thin wall for a thin wall, in the app, the script errors and the agent tools.
  • Add a bolt to a hole. Select a hole wall (or right-click a Hole feature or a pattern of holes in the tree) and choose Add fastener to hole.
  • A Nut wizard. On the Features tab, next to Screw and Washer, Nut adds a hexagon nut from ISO 4032 (regular), ISO 4035 (thin) or ISO 4033 (style 2), M2 to M16, with the corners chamfered at 30 degrees and a…
  • A Standoff wizard. Standoff adds a round or hex spacer for M2 to M6, female-female or male-female, with its length, outside size and thread length, and refuses threads that would meet.
  • A Heat-set insert wizard. Heat-set insert adds a knurled brass insert for M2 to M6 (typical catalogue sizes, marked unverified) and can also cut the recommended hole into every body it reaches or into one body you name.
  • An assistant can measure the part and check it against manufacturing rules. The MCP server gains read-only tools measure (distance and closest points between bodies, faces, edges and points), clearance (the gap between two bodies, pass or fail against a required…
  • The Chat and the agent link can read the same numbers. app_measure, app_clearance, app_interference, app_thickness, app_draft, app_dfm and app_bodies answer from the part you have open and need no permission to change it, and the Chat…
  • The injection moulding check finds undercuts. The Check tab's injection profile gains Undercut (two-part mould): faces that neither mould half can form, such as the wall of a hole drilled across the pull, with the pull axis as a setting.
  • Script helpers for draft, move face, lip, scale, split, delete and more. draft, moveFace, lip, groove, scale, moveBody, split, deleteBody, deleteFace, helix, axis and sphere are now typed script methods with documentation, so a script or an…
  • A sweep in a script can follow a helix or guide curves. sweep(profile, { curve: handle }) sweeps along the curve of helix(), and guides with guideMode (scale, turn or stretch) make the profile follow one or two guide curves, so a pipe can…
  • Split in the Bodies panel. Select two or more bodies and click Split: the first one is cut into the part outside the others and the part inside them, as the Combine bodies feature already did when its operation was set to…
  • The script guide and the limits page are corrected. llms.txt no longer suggests dome through the raw feature call (the kernel has no dome), and the Limits chapter now says that sheet metal exists and that an agent linked in Settings can run a…
  • Patterns in any direction and about any axis. A linear pattern runs along any direction vector (not only X, Y or Z) or a picked straight edge, and a circular pattern turns about any axis.
  • Springs with closed and ground ends. The Spring wizard has an Ends setting: plain, closed (tight turns that touch at each end, one by default) or closed and ground (both ends ground flat so the spring is exactly the free length).
  • A worked example: a bracket with a rib. The guide and llms.txt show how to build a bracket with a rib from one open line, with the order of features and the cut direction that make it work.

0.6.5

Open OBJ, GLB and 3MF files

Drop or open an .obj, .glb or .3mf file and it is added as a reference mesh, with colours and (for GLB and 3MF) the unit taken from the file. A notice lists what was not read, such as textures and the separate parts of a multi-part file.

A Rounded rectangle sketch tool

Click two corners and the four corners come out rounded. The corner field sets the radius, and a typed radius becomes a dimension on each corner arc; the last radius is kept for the next rectangle. Add spline point inserts a free point on an existing spline.

All changes in 0.6.5 (8)
  • A hole can aim at one body. A hole with a target drills only the bodies it names, as extrude and revolve already did; without a target nothing changes.
  • More thread sizes, and the print clearance changes the thread. The metric thread table gains M1.1, M4.5, M9, M11 and M68, and the Print clearance setting of a modelled thread now moves the thread (wider is looser, up to 1 mm).
  • A circle seen edge-on is hidden behind a slanted wall in drawings. The inside floor of a can, seen from the side, is no longer drawn as a visible line through the wall in front of it.
  • The new-version notice names the version, and Settings can check by hand. The notice that appears when a newer build is published now reads "A new version (0.6.5) is available." with Reload (it still waits for your unsaved changes), and **Settings > About > Check for…
  • Open OBJ, GLB and 3MF files as reference meshes. Drop or open an .obj, .glb or .3mf file and it is added to the part as a mesh to sketch on, like an STL, with its colours (an OBJ's come from its .mtl, dropped together with it) and the unit…
  • A Rounded rectangle sketch tool. In the Draw group next to Rectangle, click two corners and the four corners come out rounded.
  • Add a point to an existing spline. In the sketch tools, Add spline point (in the spline group) puts a new point on a fit spline where you click, between the two points it lies between, so you can bend that part by dragging the new…
  • A SolidCraft import tells you where the time went. The notice after an import now reads like "Imported part in 3.2 s: read 0.4, kernel 2.5 (310 questions), mapping 0.3, rebuild 0.0", so a slow file shows which step to blame.

0.6.4

A Spring wizard for compression springs

On the Features tab, next to Screw and Washer, Spring takes the outside diameter, wire diameter, free length and turns and adds the coil, shows the pitch and the gap between turns and previews it first. Left or right hand, along any axis; a spring() call does the same from a script. The ends are plain wire ends for now.

Slotted sheet metal parts from SolidWorks read back in full

A folded sheet with slots cut through it, such as a chute, no longer stops at an imported remainder with the slots missing. If the sheet cut cannot take a cut, it is applied as a plain cut and the feature row says so.

A second propeller no longer lands on the first

The Marine propeller wizard has a Position along the shaft setting, starts a new propeller behind the ones already in the part, and warns before inserting an identical one at the same place.

All changes in 0.6.4 (14)
  • A union where a plate corner sits a hair inside a round rim closes. A disc with a plate standing on it, one corner of the plate a fraction of a micrometre inside the rim, no longer stops with an open edge (openEdge).
  • Cutting the end of a coil flat works at every height. Cutting a swept helix coil with a plane through the wire near its end no longer fails with booleanVolumeMismatch at some heights.
  • Flanged bearings: F623 to F626. The Bearing wizard and bearing() list the flanged miniature sizes F623, F624, F625 and F626, with the flange on the outer ring at the first face, and bearing() takes a `flange.
  • Step the sketch value boxes with the arrow keys. In the length, angle and radius boxes that follow the pointer, ArrowUp and ArrowDown change the number by 1, Shift by 10 and Alt by 0.1, and the preview follows.
  • Select the bodies a feature made from its menu. Right-click a feature in the tree and choose Select its bodies to pick, in the Bodies list and the view, every body that carries faces of that feature, patterns and mirrors of it included.
  • Collapse all folders from the feature tree menu. Right-click a folder or a feature and choose Collapse all folders: every folder closes except the one you clicked (or the one that holds the feature), so you stay where you are.
  • The installed app opens .ckpart files and shows screenshots in the install dialog. The web app manifest now names the app CivilKit CAD, carries screenshots, and registers as a handler for .ckpart in browsers that support it (Chromium on desktop), so a part file opens straight in…
  • A Spring wizard adds compression springs. On the Features tab, next to Screw and Washer, Spring takes the outside diameter, wire diameter, free length and number of turns, shows the pitch and gap between turns, and previews the spring…
  • SolidWorks parts with slots through a folded sheet read back in full again. A part like a chute (a folded sheet with slots cut through it) no longer stops at "Imported remainder" with the slots missing, a regression since 0.6.0.
  • Deleting a keep-tools body keeps the names of the others. After a keepTools intersect, deleting the tool body no longer leaves the other results unnamed.
  • Thin wall slivers and thin rings mesh closed. A cylinder with a slot that ends a hair inside the wall, fused to a pin, and nested rings a few micrometres apart no longer report an open tessellation (TESSELLATION_OPEN).
  • A second tool a hair off a face fails in seconds, with a hint. A boolean whose helical or free-form tool face lies a hair off a face of the other body (as with a second propeller blade fitted 7e-3 mm off the first) now stops quickly with booleanFailed and a…
  • A pattern or mirror of a zero-depth extrude says so. The boolean refuses a one-micrometre slab (what a depth of 0 builds) with a thickness hint instead of returning a broken body as ok.
  • A second Marine propeller no longer lands on the first. The Marine propeller wizard has a Position along the shaft setting, and a new propeller starts behind the ones already in the part.

0.6.3

Chat: ask for a change in words

The new Chat panel runs the Claude Code you already have on your own computer. Describe a part or a change, watch it build in the open document, and undo the whole edit in one step. It is off until you start the local service and link the app.

Document tabs, right-click menus and a one-row sketch bar

Open parts are tabs in the top bar. Right-click a feature, a plane, a tab or an open sketch for the commands you expect there, and the sketch bar now stays on one row.

Midpoint guides and value boxes that grow with a formula

While you draw, the pointer also lines up with the middle of an existing line, and with two midpoints it lands where their dotted guides cross. The length, angle and radius boxes widen as you type a formula such as =width*2+wall.

All changes in 0.6.3 (19)
  • Unions of near-touching solids no longer fail. Two coaxial cylinders a few micrometres apart now join instead of stopping with a boolean failure (booleanFailed); the thin sliver between them is handled.
  • A union after a flat cut on a cylinder meshes closed. Joining a body to a cylinder that had been cut flat no longer leaves an open tessellation (TESSELLATION_OPEN).
  • Tangent cylinders join cleanly. A union of cylinders that touch along a line no longer welds a tiny sliver edge into one long edge, which had left a non-manifold edge (nonManifoldEdge).
  • An extrude of depth 0 now warns. A depth of 0, none or an expression that comes out as 0 gives an extrudeZeroDepth warning with a hint instead of quietly building a zero-thickness sliver.
  • Keep-tools intersects keep the names of what they keep. After a repeated keepTools intersect, the kept tool bodies and the untouched pieces keep their names, so later steps that refer to them still find them.
  • Fully define shows only while it is needed. In the sketch bar, the Fully define button is hidden once the sketch is already fully defined.
  • Chat: type a change and an assistant edits the open part. The new Chat panel (top bar button, or the Chat tab on the left) runs the Claude Code you already have on your computer through the local service: no API key and no server of ours.
  • SolidCraft imports report where the time went. The result of a SolidCraft import now lists how long reading the file, the kernel's questions (with how many) and the feature mapping each took, so a slow import can be traced to its phase.
  • Sketch value boxes grow with a typed formula. The length, angle and radius boxes that follow the pointer widen as you type an expression, so =width*2+wall stays readable instead of scrolling out of the box.
  • Midpoint alignment guides in a sketch. While drawing or dragging, the pointer also lines up with the middle of an existing line, with a dotted guide, and with two midpoints it lands where their guides cross.
  • Settings links to the published What's new. The What's new link in Settings now always opens civilkit.io/cad/whats-new, also in the Mac app and in a local build, where it used to point at the local address.
  • Document tabs moved into the top bar. On a desktop the open parts are tabs in the top bar, next to the file buttons, in place of the part name and a tab row of their own, so the model gets that row back.
  • A tidier Display menu. The Display menu's buttons, lists and sliders (Choose a texture..., Allow online libraries, Reset surface, Choose an environment...) are drawn in the app's own style and line up in…
  • Right-click menus where you expect them. A feature in the tree now offers Edit, Roll back to here, Hide in the view and Select its faces in the view above Rename, Suppress and Delete.
  • The sketch bar is one compact row. The bar over an open sketch no longer wraps to two rows and covers the top of the sketch; Look normal shows on it only while the view is turned away (N and the right-click menu always have it).
  • The left panel's tabs line up under the top bar. With the panel docked, its tabs are icon buttons in the same columns as the top bar's buttons; a tab's name is its tooltip.
  • A tidier Settings window. The window is titled Settings, keeps one size on every tab, puts each tick box next to its label and draws the lists and sliders in one style.
  • The view no longer stays turned after a sketch. Leaving a sketch on the top or right plane left the view orbiting about the sketch's own up direction, so the part tumbled as if Z were up while the view cube still showed Y up.
  • Part / Drawing is one switch, and Licences and Documentation sit in the status bar. The Part and Drawing buttons are a single two-sided switch, Install is an outlined button, and the two site links no longer float over the status bar: they are at its right end.

0.6.2

All changes in 0.6.2 (6)
  • Very thin or small parts mesh again. A plain extrude with a tiny or thin result (a disc under a tenth of a millimetre, for example) no longer fails with an open tessellation.
  • CivilKit CAD as a Mac app. Download CivilKit CAD for macOS (Apple silicon or Intel) and run it in its own window without a browser; it works offline, saves with a native Save dialog, and double-clicking a .ckpart opens it.
  • Clear coat and textures on a single body. In the Bodies tab, the selected body's Appearance gets a Clear coat slider and Choose a texture... (Poly Haven, with size, relief and credit), saved with the part like the body's colour and…
  • Pine and spruce plywood in the Material list. Plywood - pine (570 kg/m3, bending modulus 5000 N/mm2) and Plywood - spruce (460 kg/m3, 8131 N/mm2) join the wood panels, each from a named manufacturer declaration of performance and marked…
  • Light the part with a real-world environment. Display > Choose an environment... lists the HDRI environments of the Poly Haven library (public domain) and uses the chosen one for the reflections instead of the built-in studio light.
  • Poly Haven textures now have relief. A texture's normal map is drawn on the part too, mapped from all three sides, so the grain catches the light.

0.6.1

Roughness, metalness, clear coat and wood grain

The Display menu's Surface group sets how a part catches the light, and draws a wood grain with the ring spacing, contrast and colour you choose.

Textures from Poly Haven

Pick a wood texture from the free Poly Haven library in the Display menu and the part is drawn with it, with roughness, a size slider and the author credited. Online libraries are off until you allow them.

Choose the mass unit and digits

Settings > General > Mass display shows a mass in grams, kilograms, pounds or ounces with 3 to 6 digits, everywhere a mass appears.

All changes in 0.6.1 (7)
  • Mirroring a sheet metal part keeps it a sheet. With replace the mirror image takes the part's place and unfolds the same, about any plane including a flat face.
  • Scripts can pick edges and faces by position. edges(...) and faces(...) gain .sortBy, .groupBy, .nth, .first and .last, so a script can ask for "the two highest edges", "every edge at height 12" or "the third rung along the rail"…
  • Choose the mass unit and digits. Settings > General > Mass display shows masses in automatic (g or kg), grams, kilograms, pounds or ounces, with 3 to 6 significant digits, in the Inspect panel, the material editor, the bill of…
  • Eucalyptus plywood in the Material list. Plywood - eucalyptus (EN 636 structural, 18 mm: 650 kg/m3, stiffness class E70/60) joins the wood panels, marked unverified until checked against a product standard.
  • Textures from the Poly Haven library. In the Display menu's Surface group, Choose a texture... lists the library's wood textures with thumbnails and a search.
  • An "Online libraries" setting, off by default. Settings > General > Use online libraries lets the app download textures from Poly Haven.
  • Surface controls for roughness, metalness, clear coat and the wood grain. The Display menu's appearance section gains Roughness, Metalness and Clear coat sliders and, for woods (or when you tick Wood grain), the ring spacing, contrast, colour and direction…

0.6.0

A fold can cross a window

A fold line through a window or hole of a sheet metal part now bends the part and cuts the window through the bend.

Delete both

Delete something others use and the notice names what depends on it, with a Delete both button that removes them together in one step.

The BOM as plain text

Copy as text and Save as text give the bill of materials as aligned columns, ready for an e-mail, next to Save CSV.

More woods and panels

Birch, cedar, cherry, Douglas fir, eucalyptus, maple, teak and walnut join the Material list, each with its own colour, density and source.

A Washer wizard

Pick a flat or spring washer size from ISO 7089, ISO 7093-1 or DIN 127 B, or type your own, and it lands in the tree as one folder.

All changes in 0.6.0 (20)
  • The Washer wizard can put a washer on a hole. Click "Washer on a hole", then a hole's wall or circular edge.
  • An arc slot can be edited after it is drawn. Click one of its arcs in the sketch and change its radius, start angle, sweep or width in the fields that appear.
  • The guide says CivilKit CAD, has the suite navigation, and covers this release. The guide's text now uses the product's name, its menu bar links to Calcs, Calculators, CAD, Guides and What's new, and the new features (BOM as text, Delete both, Enter repeat, woods and grain…
  • A flange or hem can go on the free end of a flange (a double fold). Clicking the edge at the tip of an existing flange now adds a second flange or a hem there; before, the app refused with "edge already has a flange".
  • Woods show a grain. A part with a solid wood material (walnut, oak, birch and the rest) now shows growth rings and fine streaks in a darker tone of its colour, along the longest side of the part.
  • A fold can cross a window in the sheet. A fold line that runs through a hole or window of a sheet metal panel now bends the part and cuts the window through the bend; before, it was refused with "a hole of the panel meets the bend zone".
  • A plain extrude cut through a folded sheet keeps it a sheet. A through-all (or deep enough) Extrude cut drawn parallel to the sheet is now a sheet cut, so the part still unfolds; a shallow pocket still ends the sheet.
  • A sketch on the plate survives removing the only fold. The plate's faces keep working under both of their names, so a slot drawn on the plate no longer loses its reference when you remove the fold.
  • Enter repeats the last command; the view cube's edges and corners are bigger. With nothing in progress (no sketch, no feature being edited, no dialog), Enter runs Repeat last command again.
  • Deleting a feature that others use offers to delete them too. When a delete is blocked, the notice now names the features that use it and has a Delete both button that removes them together in one step (one Undo brings them back).
  • Eight more woods and three wood panels in the Material list. Birch, cedar, cherry, Douglas fir, eucalyptus, maple, teak and walnut join Oak and Pine, each with density and stiffness from a named source and its own colour.
  • The bill of materials copies and saves as plain text. The assembly BOM gains Copy as text and Save as text (aligned columns, ready for an e-mail).
  • The parts library is credited as BOSL2-based parts. The library formerly named "BOSL2 parts" is now BOSL2-based parts, with a credit line (BOSL2 by Revar Desmera and contributors, BSD-2-Clause, link) on its row in the Libraries tab, in each part's…
  • A wheel zoom speed setting. Settings > Navigation gains Wheel zoom speed (0.5x to 3x, 1x as before) for the mouse wheel and trackpad pinch, in the 3D view and in a sketch; it is remembered on the device.
  • An agent can see and drive the part you have open (agent link). Settings gains Agent link: paste the one-time code an MCP assistant gets from bridge_pair and it can read the open part (app_state), take a picture of it (app_screenshot) and, only if you…
  • A Solarized Dark theme. Settings > Theme gains Solarized Dark, a dark theme in the Solarized palette (panels, text, accents and the viewport background); it is remembered like the other themes.
  • OBJ export keeps the body names and colours. Exporting OBJ now writes one object per body, named as in the tree, and a body with a colour carries it on its vertices (x y z r g b, read by Blender, MeshLab and most viewers).
  • A misspelt agent-tool field is refused with a suggestion. A tool call with an unknown field (veiw for view) fails before anything runs, naming the closest allowed field, listing the allowed ones and saying that parameters go at the top level of the…
  • Pipe cut says what it does. Its editor now notes that it rolls a ball along the picked edges and leaves a surface body, and points to Hole (or a sketch and a cut) for a round hole.
  • A Washer wizard for flat and spring washers. Pick a standard size from a filterable list (ISO 7089, ISO 7093-1, DIN 127 B) or type your own, then place it like a screw.

0.5.0

A Sheet metal tab

Convert a solid to sheet, add edge flanges, hems and corner reliefs, cut across bends and round or chamfer corners. Edge flange, Hem and Corner open with their pick list ready: tap the edges or corners in the model, tap again to take one out.

Flanges on part of an edge, with shaped legs

An edge flange can cover the whole edge, a start and length along it, or the span between two points you pick, with shaped legs, holes and relief. Bases with rounded corners take flanges too.

SolidWorks sheet metal opens as editable sheet metal

Open an SLDPRT sheet metal part and its flanges come back as editable Edge flange features, with partial-width and sketched-profile flanges, leg rounds, slots and holes.

Arc slot

A curved slot in the sketch tools: pick the centre, the start of the slot and its end, then set the radius and width.

Dimension to the part's own edge

With the Dimension tool, click an outer edge of the part to set how far a slot or hole sits from it.

Library

Samples is now Library: every library in one picker, a Manage libraries list, pictures on saved parts, and Insert into this part on each card.

One filter for the Library

A category menu and tags with counts narrow the Library cards, and Clear brings everything back.

All changes in 0.5.0 (123)
  • SolidWorks sheet metal parts open as editable sheet metal. An SLDPRT sheet metal part now opens with its sheet metal history read back.
  • Edge flanges and folds on a base with rounded corners. A sheet metal base with arcs in its outline (filleted corners, slots at the edge) no longer refuses an edge flange; the flange is built on the straight edges and the arcs stay as they are
  • The app shows its version, and releases are cut with a script. Settings now ends with "Version X.Y.Z (app <commit>, kernel <build>)", and the live site's version.json carries the same three values (version, app commit, kernel build).
  • One filter for the Library: categories, tags and counts. The Library picker and the Catalog's Libraries tab now share one filter bar.
  • Insert a part from the Library picker. Each part card in the Library (bundled samples and added libraries) now has Insert into this part under it, next to the default click that opens the part as a new document.
  • The Samples button is now Library, with every library in one picker, and a Manage libraries list. The top-bar Samples button and its dialog are renamed Library.
  • Edge flanges and hems on part of an edge, and shaped legs, in the editor. The Sheet tab's Edge flange editor gains Width (the whole edge, Start and length along the picked edge, or Between two points typed or picked with Pick two points in the view)…
  • Dimension a sketch to the part's own edge in one click. With the Dimension tool you can now click an outer edge of the part (a body edge, not sketch geometry), for example to set a slot's distance from the plate's side.
  • An Arc slot sketch tool. The Slot button in the sketch tools now also offers Arc slot (in its flyout): a curved slot made of two concentric arcs joined by two half-round ends.
  • Edge flange, Hem and Corner open with nothing selected. The three Sheet commands no longer stay grey until an edge or corner is picked.
  • Sheet metal: Convert to sheet, Cut across bends, Corner round and chamfer, and panel picks. The Sheet tab's Create group gains Convert to sheet (turns a bent plate solid into a sheet with its flat pattern.
  • Selecting a component in the feature tree lights it up in the viewport. Clicking a component row (an inserted part) highlights all of that component's faces and edges, so one of many near-identical parts can be told apart.
  • Four sheet metal samples. The sample list has four parts made with the new Sheet metal tools, each with its feature tree to read.
  • A Sheet metal tab. The new Sheet metal ribbon tab (also in the command search and the tool palette) has four groups.
  • A reference that no longer resolves says what is there instead. When a feature uses a face or an edge that an earlier edit removed, the feature's status now names the missing face and lists the faces of that feature that exist now (closest name first), or, for an…
  • Script: colour faces by role, not by feature id. p.appearance({ face: handle, only: ['S.e3', 'C1'], colour }) colours just those faces of the feature the handle names.
  • US and European steel stock for Frames, and steel grades in the Material editor. The Frame Profile list gains the US W, S, C, MC and L shapes, the full set of HSS and pipe (1,087 US profiles, the earlier HSS ids kept) and the European IPE, IPE A/O/AA, HE A/B/M/AA, IPN and UPN…
  • Australian and US steel stock for Frames. The Frame Profile list now has 682 catalogue profiles on top of the generic ones, grouped by region, standard and kind of section, with a search box.
  • Import SVG as sketch geometry. Import SVG into sketch and New sketch from SVG (Home > Sketch, the command search, and dropping an .svg file on the window) bring a vector drawing into a sketch, next to the DXF ones.
  • Dimension between centre lines and centre marks. In a drawing, the dashed centre lines of shafts and the centre marks of holes are now real objects.
  • 3D Sketch panel restyled, and an Introduction to 3D sketching. The panel now fits the narrow left panel: the five draw modes are one grid of icon buttons with a short hint under them, the form is split into Draw, Where you click, Add by coordinates…
  • Script assertions: expectMinFaceArea, a tolerance option, and per-body checks. P.expectMinFaceArea(a) fails when any face is smaller than a mm2 (no slivers) and names the smallest face.
  • Draw curves from a function in a script. s.curve((t) => [x, y], { from, to, count, closed }) samples a JavaScript function into one fitted spline (`closed.
  • Script checks show as pass / fail rows. After a Run the Script tab lists every expectVolume, expectBBox, expectMinFaceArea, expectValid and expectFaceCount check with a tick and what was checked, or a cross and the failure (also…
  • Script errors are impossible to miss, and typing in the Script box stays in the box. A failed run shows a red banner above the code box with the message and line number (it stays until the next Run) and tints the failing line.
  • New sample: Tapered spinning disc. A flat disc that slopes up from a thin edge to a low cone at the centre, with 12 smooth ridges running from the centre to a plain circular edge that rises and falls once per ridge (so a ball rolling…
  • PET bottle with curved petal grooves, and a rounded groove floor on the straight-groove bottle. A new sample, PET bottle, curved petals, sweeps a round groove along a 3D spline (a 3D Sketch path) for each foot gap.
  • A 3D Sketch tool. 3D Sketch (Home > Sketch, and the command search) draws lines, 3-point arcs, splines, control-vertex splines and points in space.
  • Chamfer chains end flush and mitre cleanly; more SolidWorks features rebuilt. A chamfer along a chain of edges now ends flush with the neighbouring faces and mitres at the corners, and the SolidWorks history rebuild reaches further on more parts.
  • The feature history of an imported SolidWorks part sits in one folder you can switch off. A .SLDPRT with any rebuilt history, complete or partial, now opens with every rebuilt feature (planes, sketches, extrudes, fillets ...) inside one folder of the feature tree, "SolidWorks history"…
  • Split Entity: break a line, arc, circle or fit spline at a picked point. A new Split entity tool in the sketch Edit group (with Trim and Extend.
  • A Project curve command. Features > Reference > Project curve projects a sketch, or an earlier Edit / Project curve selected in the tree, onto the faces you picked (none picked.
  • Edit curve and Freeform commands. Edit curve (Features > Reference) rebuilds the picked edges, the curves of a sketch or an earlier curve as one curve.
  • Feature commands doc and creator header no longer say Scale and Move face have no command. Scale has its own command (Features > Modify) and Move face / Move body come from the positioning ball.
  • Export 3MF. Export, 3MF (3D printing) writes a .3mf file.
  • Export glTF (GLB). Export, glTF (GLB) writes a single binary .glb (glTF 2.0) with positions, normals and indices, and one node and material per body (colour, opacity, and metallic and roughness when set). glTF is…
  • The Fillet editor now offers Full round. Tick Full round and pick the two side faces and the centre face between them.
  • The Extrude editor now has a Twist. Twist over the depth (degrees, positive counter-clockwise about the sketch normal) turns each slice about an axis through the sketch point you give (the sketch origin by default).
  • The Thicken editor now has Variable thickness. Tick it to give the thickness as stops (2 to 6 positions along X, Y or Z with a thickness at each) instead of one value, so a blade or fin tapers root to tip in one step.
  • The Loft editor now has a Centre line and Connectors. Choose an open sketch as the Centre line and the sections follow it (a bottle neck, a duct, a handle); a straight one changes nothing.
  • A SolidWorks part opens with its feature history when it can be rebuilt. Opening a .SLDPRT used to give one "Imported STEP body" feature.
  • Adding edges to a saved Fillet or Chamfer later gives what picking them all at once gives. Edges clicked while a Fillet or Chamfer editor was open were read on the body on screen, which already has that fillet applied.
  • Several edges can be picked for a Fillet or Chamfer on a phone or tablet. Adding an edge needed Ctrl, Cmd or Shift held while clicking, and a touch screen has none, so each tap replaced the edge.
  • Ticking Tangent chain in a Fillet or Chamfer editor now adds the chain to edges picked without it. The box only re-applied the chain to an edge list it had just made itself.
  • The Extrude Shapes list now ticks what is actually built, and ticking a hole fills it. A new Extrude or Revolve with no shape choice builds by even-odd nesting: a shape inside another is its hole, a shape inside that hole is solid again.
  • PET bottle sample: a smooth petaloid base, with no sharp edges. The base was five lens-shaped grooves cut into a revolved bottle, whose edges the kernel cannot fillet.
  • Rotate entities with copies no longer pins the copies to the axes. Rotating a shape that had a vertical or horizontal lock (or a horizontal / vertical distance) with COPIES, for example five petals at 72 degrees, copied those locks onto every copy.
  • Calmer constraint markers in the sketch. The glyph chips were 22 px each, one per line, and covered a drawn rectangle.
  • Sketch dimensions are value chips and constraint markers are glyph chips. A dimension value is drawn as a small dark rounded chip with the value in a monospace face (Ø80.00 mm, 40.00 mm, 90.0°), with pale-violet dimension and extension lines and arrowheads.
  • Drawing a rectangle (or a circle, line or slot) is no longer pulled to the grid everywhere. The grid snap caught the pointer within the 12 px pick radius, while the grid lines are 8 to 80 px apart (about 20 px by default), so the radius reached past the middle between two grid points and…
  • Loops that share a corner point can be extruded one at a time. A sketch whose closed loops meet at a shared point (five petals that all start at the sketch origin, a rectangle split by a diagonal) listed no shapes at all, so the Shapes list was empty and…
  • Deleting a sketch no longer leaves its drawing behind. Deleting the sketch you had open (tree trash icon or right-click Delete) removed it from the tree, but its points, lines, dimension chips and constraint chips stayed on the 3D view, and a new sketch…
  • Exporting the same part again does not cut the cosmetic knurls again. The cut that puts a cosmetic knurl into a STEP, STL or OBJ file (seconds for an ordinary V knurl, up to about 40 s for a heavy diamond or pyramid) is now kept after it succeeds, and the next export…
  • PET bottle sample: a threaded neck and a screw cap that really screws on. The bottle's neck now carries a real helical thread (28 mm finish.
  • Exports include cosmetic knurls as real cuts. A cosmetic (display only) knurl was missing from STEP, STL and OBJ files.
  • A cosmetic knurl is no longer lost when a variable of a script-built part is changed. Changing a variable on the Variables tab rebuilds a part made by a script, unless the model was changed by hand since.
  • The view cube's arrow ring is smaller on a phone, and you choose which buttons it has. From the first real phone: the ring covered too much of the drawing.
  • A value typed into an on-canvas size label now applies on a phone. The label's box committed only on an Enter key, and a phone keyboard's Done key sends none (closing the keyboard counts as leaving the box), so the typed number was dropped and nothing changed.
  • The size labels of a revolve resize it, and a label edit that cannot be applied says why. Typing a number into the on-canvas label of a revolved part (a cylinder with domed ends, for example) did nothing, on a phone and on the desktop, and said nothing.
  • The check key of a phone keyboard applies a typed size or sketch value whichever event it sends. The on-canvas size label commits on Enter, a keyboard Done key arriving as key code 13 with another key name, a line-break input event, a change event or a blur (once, whichever comes first).
  • Pick the sketch plane in the 3D view. Press S with nothing selected (or choose Pick plane in the sketch button, or the command **New sketch.
  • Sketch Report. A new Sketch Report button in the Status group of the sketch ribbon (also in the command search) opens a summary of the sketch.
  • The pointer's sketch coordinates beside the pointer. While a sketch is open, a small label follows the mouse a few pixels down and right of it and says the position on the sketch plane in the display unit (5.61 mm, -7.13 mm), at the snapped point…
  • Preview: an Icon set setting with SolidCraft's icons. Settings, General has a new Icon set choice: Default (our own icons) or SolidCraft (preview).
  • View cube with an arrow ring: flip the view from a finger. The cube is now a chamfered cube whose six faces, twelve edge bevels and eight corners are all targets (the one under the pointer or finger lights up), with readable FRONT, BACK, LEFT, RIGHT, TOP and…
  • Export a feature-tree folder as a part. Right-click a folder: Export folder geometry as STEP, STL or a frozen .ckpart writes the bodies the folder's features created or changed (picked from the face names of the built model, then cut…
  • Phone: one slim top bar, tools above the bottom bar, properties that share the screen, number keypads and drawing by touch. Fixes from the first real phone.
  • Phone and tablet layouts: open a part, orbit, pinch, tap, and reach the tree, properties and diagnostics. The app picks a layout from the window width and the pointer (phone under 700 px or a small touch screen, tablet under 1100 px or any touch device, otherwise desktop.
  • FreeCAD import is checked against FreeCAD itself, and maps far more. packages/fcstd/corpus holds 84 small documents saved by FreeCAD 1.1.4 with FreeCAD's own measurements of every stored shape.
  • BLDC motor samples: 5010 outrunner and 2804 gimbal. Two more bundled samples, own models with typical catalogue dimensions.
  • BLDC motor samples. Three bundled samples, own models with typical catalogue dimensions: outrunner drone motors 2212 and 2306 and a 2430 inrunner.
  • Target body for Add and Cut, and the maker of each body in the Bodies list. Once a part names a body, the Extrude editor shows a Target body control for Add and Cut.
  • Live parameters keep min, max, pow, mod, round and the other functions. The expression grammar of a part gained min, max, pow, mod, hypot, atan2, asin, acos, atan, round, floor, ceil, trunc, exp, ln and log10 (called as name(...), with a…
  • SolidCraft import keeps parameters live. The named parameters of a converted file used to be evaluated once and their names dropped.
  • SolidCraft import: parameter expressions with functions, powers and units. A file whose parameters use sqrt, sin, cos, min, max, pow, mod, round and the like, a power (a ^ 2), pi, or a unit other than mm (2 cm, 1 in, 0.5 rad) was refused as a whole…
  • SolidCraft import: symmetric, two-sided and tapered extrudes. A symmetric extent (the total distance centred on the sketch plane, or through all) became an unsupported row, a taper was dropped without a word (the section came out straight), and a start from a…
  • SolidCraft import: regions chosen by their whole outlines, and revolves about any axis. Extrudes, revolves and sheet bases that name their regions by whole outer and hole outlines are carried (one curve of each outline picks the region; holes stay holes).
  • SolidCraft import: sweeps along lines and arcs, lofts to a point and along rails. A sweep along a path of lines and arcs in a planar sketch is carried, with its twist (the path sketch may draw other curves too: only the path's own are used).
  • SolidCraft import: holes up to a face, circular patterns of features, mirrors of bodies, tori, sheet bases, ellipses and more constraints. A hole drilled up to a face is a blind hole as deep as that face is far.
  • SolidCraft import: sub-assemblies, hidden placements and timeline folders. A component placed inside another component is inserted into that component's part and moves with it (it was placed from the design's origin, so a part inside a moved sub-assembly stood in the wrong…
  • MCP export writes the stored view: cache: true on a .ckpart. The file gets the same viewCache field as Save geometry in file, so the app shows the part at once on open.
  • Bearing rings have a ball groove. Both rings of the Bearing wizard and bearing() now carry a real raceway.
  • A SolidWorks part opens as an editable body. A .sldprt file used to appear as a view-only solid.
  • A SolidCraft file converted from SolidWorks stands the way SolidWorks has it. The importer turns every point of a file from Z up to this kit's Y up, but SolidWorks already is Y up with the front plane XY (as the .sldprt import and the .ckpart Dutchman writes keep it), so a…
  • SolidCraft import checks the original solid of a converted file before it uses it. A file converted from SolidWorks (or any program whose STEP the converter restates itself) keeps the original solid as STEP, and the converter can write some faces of it turned the other way.
  • A wizard's result lands in the feature tree as one folder named after the wizard. Bearing, Screw, Knurl (cut and faceted forms), Propeller, Marine propeller, Turbo impeller and Gear (and Gear pair, mating gear included) stamp the cosmetic group on everything they add, through…
  • SolidCraft import: the original solid of a converted file is the body. A file converted from another CAD system keeps its solid as a STEP body inside the archive, followed by the sketches and operations built on it.
  • Printed-thread clearance. A modeled thread has a Print clearance row (None / Wider / Narrower with a millimetre value, 0.2 by default) that writes a signed clearance on the thread feature (Wider positive).
  • Import offers a Z-up view only when it is clear. A STEP or SolidWorks part whose flat area facing down Z is at least 1.5 times the larger flat area facing down or up Y (faces within 10 degrees) gets a notice with "Use Z up".
  • Quick measurement. Select an edge, face or two items and their size shows in the corner of the view.
  • Export only visible bodies : a checkbox in the Export menu leaves hidden bodies out of STL and OBJ files.
  • Repeat last command in the command search and the Edit group runs the command run before it again.
  • Sketch dimensions: a slot's two end caps measure its overall length (Dimension tool: click one cap arc, then the other; the label shows the overall length, the kernel keeps the centre distance that gives it).
  • Sketch: Alt makes a rectangle a square (corner and centre rectangle: both sides take the longer pointer offset, or a typed side).
  • Sketch: a circle or arc dimension switches between radius and diameter (right-click the dimension; an expression keeps driving the same size), `name = value` in a dimension or tool value box defines a parameter (a new variable, or the existing one given the new…
  • Bearing wizard and bearing() script helper. Catalog > Primitives > Generators > Bearing (or command search).
  • MCP: complete method registry, guide and llms.txt. list_methods / docs read the registry generated from the script JSDoc, so every method run_script accepts is documented (appearance, bodyName, group, handle, sweep, workplane, insertPart…
  • MCP bodies tool (name, creating feature, volume, bbox, colour per body) and `drawing` tool (views, dimensions, hole callouts, section, SVG / PDF / DXF from the app's drawing layer).
  • newBody: true | 'Name' on extrude, revolve and sweep keeps a solid separate instead of fusing it.
  • appearance({ feature }) on a pattern also styles the seed's body.
  • Bodies: Appearance applies to every selected body. Colour, opacity and finish edited in the Bodies panel go to the whole selection (an unselected body is edited alone).
  • Phone and tablet: the Licences link no longer prints over the bottom bar, and the selection card no longer hides under the Resize about panel. The published site's floating Licences and Documentation links are hidden on a phone or tablet and listed in the more menu.
  • A knurl cut into a cylinder keeps its distance from the end face when the part is edited. The Knurl wizard used to write the band as fixed positions along the axis, so changing a 30 mm shaft with a band ending 5 mm from its end to 20 mm left the band past the end of the shaft, and the…
  • The message for a knurl band that cuts nothing says what happened. Instead of "it cuts nothing", the failure card now says the knurl band no longer touches the part, and for a knurl placed at fixed positions suggests undoing the change or setting the band again (Cut…
  • A bearing placed on a face stays on that face when the part is edited. The Bearing wizard used to write the position of its first face as numbers, so changing a shaft from 30 mm to 20 mm left the bearing and its housing seat at the old end ("The edit broke the model at…
  • The message for a bearing seat that cuts nothing says what happened. Instead of "it cuts nothing", the failure card now says the bearing seat no longer touches the part, and that a bearing placed at a fixed position stays where it was made when the part changes.
  • A cosmetic knurl shows in the feature tree and can be reopened. A knurl made with the wizard's Cosmetic box ticked (display only, instant) was drawn in the view but had no row anywhere.
  • Extruding from a face of a converted part works again. A part converted from another CAD system keeps the original solid (named "Original (STEP)") on top of the body its history builds, and a circle sketched on a face then extruded as Cut (through all or…
  • SolidCraft import: the sketches of a moved body no longer show where the body used to be. The copies of a moved body's sketches (added earlier, <sketch> (<body>)) are now shown when a model has up to 40 of them, so the sketches you see lie on the solids.
  • Extruding from a face of a converted part works again. A part converted from another CAD system keeps the original solid (named "Original (STEP)") next to the body its history builds, and a circle sketched on a face then extruded as Cut (through all or…
  • A second bearing of the same size no longer breaks the model with "body name conflict". The Bearing wizard names its bodies after the size ("Bearing 608 inner ring"), so a second 608 repeated the names.
  • SolidCraft import: a control-vertex spline used as a sweep path follows its B-spline. The path was always drawn through the file's points, which for a spline marked control: true (every freeform spline from a Fusion 360 conversion) are the control polygon, not points on the curve.
  • SolidCraft import: a cut that selects "all" profiles of a sketch with an outline around other shapes carries a note. The file does not name the regions, so the cut takes the whole sketch and can remove the whole body; the row now says so.
  • SolidCraft import names imported geometry. A file converted from another CAD system keeps the original solid as an import feature (a STEP body); it was reported as an unknown feature type.
  • SolidCraft import carries splines in sketches. A spline curve in a profile sketch (a file from Fusion 360 draws its freeform edges that way) was reported as an unsupported sketch curve and took its extrude with it.
  • Importing a large SolidCraft file shows what it is doing to the end. The progress line used to disappear when the importer returned, and then the model was rebuilt in the kernel for minutes with nothing on screen.
  • A part edited while it was being saved is no longer marked saved (and its autosave copy is kept): the saved state is that of the document the write began with.
  • The Save As picker reopens in the folder used last (browsers that support the file picker).
  • Imported SolidCraft sketches follow their moved body. Move, Mirror and Pattern import as moveBody, which moves bodies but not the sketches that built them, so a sketch stayed where it was drawn.
  • snapshot with sheet: true or annotate: true crashed; true now means the third-angle drawing sheet and the overall bounding-box dimensions.
  • profileCrossesAxis and cutNoEffect hints say what to draw (half the profile from the axis) and print the sketch frame.
  • Knurl: pick the face after opening the wizard. Opening Knurl with no round face selected used to show a red message and a dimmed button, so you had to cancel, select the face and open Knurl again.
  • The Knurl wizard starts in Cosmetic (instant) mode, and its checkbox is a normal checkbox. The wizard used to cut a real knurl unless you ticked Cosmetic.

0.4.0

All changes in 0.4.0 (4)
  • Renamed to ck. Parts are saved as .ckpart with the format name ck-part, the kernel crates are ck-*, the wasm is ck_wasm, the environment switches are CK_* (CK_REBUILD, CK_WASM) and the kit's aliases…
  • Old files still open. .fwpart and .fwpart.gz open, drop and import as before, and the format names fw-part and formwerk-part are read and become ck-part in the document, so the next save writes the new names.
  • A view saved inside a file by 0.3.9 or earlier is not used (it was keyed to the old kernel build anyway); the part rebuilds as usual and the next "Save geometry in file" writes a new one.
  • Sample thumbnails stay current across the rename: the picture hash reads ck-part as the name it was made with.

0.3.9

All changes in 0.3.9 (2)
  • Geometry in the file. More file actions > "Save geometry in file" keeps the built view inside the .ckpart, so opening it anywhere shows the model about a second after the drop instead of rebuilding for ~19 s…
  • Save As showed no Compress box. 0.3.6 said it did, but the checkbox was never drawn (the state and text existed, not the markup), so .gz could only be had by typing it into a picker.

0.3.8

All changes in 0.3.8 (3)
  • Scale command. Features > Modify > Scale scales the whole part about its centre of mass (a factor of 2 to start).
  • A file's hidden bodies no longer stretch the view. Fit framed the box around every body, including ones the file hides (SELENE-functional's 21 track ridges are 1.5 m wide and hidden), so the rover opened small in the middle of an empty view.
  • SolidCraft import: sketches and datum planes stay out of the way. Imported sketches and planes are hidden (shown again from the tree), as SolidCraft hides the ones its features have consumed.

0.3.7

All changes in 0.3.7 (3)
  • Big multi-body files rebuild in seconds, not minutes (kernel). Every boolean result re-checks the volume of each face, and the table that remembers them held 8,192 faces and emptied itself when full.
  • SolidCraft import: features of a component that act on a transferred body now run. A body handed to a component by a body transfer is still built where it was made, so the component's moves, scales, cuts and removes of it found "no such body" and were dropped.
  • A cut that names participants (not only targets) cuts those bodies, as SolidCraft's own evaluator does; before, such a cut was applied to everything.

0.3.6

All changes in 0.3.6 (1)
  • Compressed parts. Save As has a "Compress" box, which saves the part as name.ckpart.gz (gzip).

0.3.5

All changes in 0.3.5 (3)
  • Scale. The kernel scales bodies about a point by one factor or one per axis (scale), exactly where the shape stays exact.
  • Extrema query (kernel, for agents and tools): the extent of a body or selection along a direction, with the extreme points and what they lie on.
  • Kernel update: large parts open and edit faster (see 0.3.2), and the gate now also runs the fillet corpus.

0.3.4

All changes in 0.3.4 (1)
  • The Display panel could not be scrolled to its last items. Its height was capped as if the window had a short header, so with the full ribbon the bottom of the list (Grid, Relations, Overall size, Threads, Design issues) sat below the viewport, out of reach.

0.3.3

All changes in 0.3.3 (1)
  • New defaults. Reference planes are hidden until you switch them on (Show > Planes).

0.3.2

All changes in 0.3.2 (1)
  • Large parts open and edit much faster (kernel). The kernel stored a snapshot of its state after every feature, which for a part with thousands of features meant copying a growing model thousands of times.

0.3.1

All changes in 0.3.1 (2)
  • SolidCraft import: a profile corner on the sketch origin of a moved plane landed on the world origin. SELENE's parabolic dish (a bowl profile on a plane at x = -190) revolved into a huge cone because its closing point went to (0, 0) instead of the plane's own origin.
  • SELENE's path sketches (hose and wire routes) and coil helices are hidden on import like the other sketches and planes, instead of drawing as thin blue lines over the model.

0.3.0

All changes in 0.3.0 (4)
  • SolidCraft colours. The importer reads each body's colour, opacity and (in newer files) its PBR values (metallic, roughness), and the bodies a file hides, and saves them in the part (appearance, view), keyed by the…
  • Metallic and roughness per body. The Bodies panel has two sliders (Metallic, Roughness) next to Colour, Opacity and Finish.
  • Bodies hidden by feature. A feature id in the hidden list hides every body that feature made; showing one body keeps its siblings hidden.
  • Bodies of an inserted component in an assembly are keyed feature@insert (e.g. F2@F6), so their colours and names no longer collide with the assembly's own feature of the same number.

0.2.2

All changes in 0.2.2 (1)
  • The feature tree scrolled into blank space on long parts (SELENE, 4,218 features): the list looked for its scroll box in the wrong place once the left panel had tabs, so scrolling never loaded the rows.

0.2.1

All changes in 0.2.1 (5)
  • Syntax colouring in the Script box (comments, strings, numbers, keywords, calls), in the light and dark themes.
  • Tabs can be dragged to reorder , and a ▾ list of all open parts appears when they no longer fit (or there are many).
  • Keyboard shortcuts for tabs: Ctrl+Tab / Ctrl+Shift+Tab step through them (also from the Script box), Ctrl+Alt+1..9 jump to one (9 is the last), Ctrl+Alt+T opens a new part, Ctrl+Alt+W closes the active one.
  • Script panel: the Examples list now sits on its own row above Run / Open / Save / Format, spans the panel, and has short names (it ran off the panel before); the examples added later no longer show their raw keys.
  • Switching tabs in the middle of a sketch finishes the sketch and keeps it (as the check mark does) instead of refusing; when the sketch cannot be finished it stays open and says so.

0.2.0

All changes in 0.2.0 (3)
  • Document tabs. Several parts open at once, as tabs under the top bar.
  • Autosave of every changed tab. After a reload or crash the app offers to restore the session, each changed part in its own tab.
  • Edit this part opens the component in its own tab (linked to its assembly) instead of replacing the assembly on screen.

0.1.5

All changes in 0.1.5 (2)
  • Edit this part's features from the Features tab. The editor of a component (the pencil on its row) now has an "Edit this part's features" button; it is the same action as the ⚙ in the Assembly panel.
  • The "A new version is available" notice moved into the top bar, next to the part name: over the viewport it covered the Start here card in a short window and the selection filter bar elsewhere.

0.1.4

All changes in 0.1.4 (1)
  • Edit a component's own features. Each component row of an assembly has an "Edit this part" button (⚙).

0.1.3

All changes in 0.1.3 (1)
  • The "A new version is available" bar: Refresh and Later did nothing, because the layer it sits in ignores the mouse and the bar did not turn that back on.

0.1.2

All changes in 0.1.2 (3)
  • SolidCraft import: sweeps along a spline and coils. The path sketch becomes a 3D sketch holding the spline; a coil becomes a helix, the wire's section and a sweep along it (round or square wire, either hand, inside, centred or outside).
  • Rebuilding the SELENE functional file is still very slow (many minutes): the Pi 5 board has hundreds of small boxes and cylinders cut into one body and each cut gets slower.
  • Six cuts of the showcase's clamping hubs report cutNoEffect in the kernel.

0.1.1

All changes in 0.1.1 (2)
  • Opening a big SolidCraft file looked dead. Each fillet, chamfer or shell made the importer rebuild and validate the whole part built so far, minutes per question on a large file.
  • Import progress. A panel appears at once ("Importing X: feature n of m") with a Cancel button; an import that throws reports it; autosave waits while an import runs.

0.1.0

All changes in 0.1.0 (12)
  • Sphere feature. A kernel sphere (centre and radius, one spherical face; add, cut or new body) with its editor and tree icon.
  • Bodies. The Bodies panel shows the names a document gives, and offers Copy, Delete, Join, Cut and Intersect of whole bodies.
  • Frame planes. A plane feature in frame mode: a plane given by an origin and two directions.
  • Installable app. The studio installs as a PWA.
  • Stack status. npm run stack:status compares the dev wasm, the built site and the live site with main; the pages build writes version.json.
  • SolidCraft import - Holes (simple, drilled, counterbore, countersink, at a position or at sketch points) become our hole feature. - Sketches on tilted planes and cylinders along any axis import. - Circular patterns of…
  • A SolidCraft body transfer that moves nothing is skipped instead of reported as unsupported.
  • Kernel ping reports the commit the wasm was built from.
  • Overhang-corner fillets generalise (mirror, under the ledge, two vertices; skewed corners are refused).
  • Blade-fuse clips the hub-cylinder intersection to the blade rail when it overshoots.
  • Read-only design-for-manufacture queries.
  • Render close-up framing option.